Radio Controlled cars, trucks and airplanes - Hobby Store London Ontario

E-flite - Cessna 182 370 ARF

Top Menu Line
Top Menu Bottom Line
Left Side Border
Left Side Border
spacer
Content Top Line
Aerobird Swift RTF Electric

Key Features

  • Includes 5.33:1 gearbox and 10 x 7 prop
  • One-piece wing
  • Preinstalled control horns
  • Preinstalled push rods and push rod tubes
  • Preinstalled servo tray
  • Prefabricated landing gear w/painted wheel pants
  • Vacuumed formed construction

Overview

It's not often you find a 4-channel, modern-era general aviation subject in the world of park flyers, let alone an officially licensed one that looks this good. And, believe it or not, two hours is about all it takes to get it flying. All the “heavy lifting” has been done for you from pushrod and control horn installation to painting the cowl and wheel pants—you basically just drop in your motor and electronics and fly.


Specs
Wing Span: 38 in (965mm)
Overall Length: 30 in (760mm)
Wing Area: 215 sq in (14 sq dm)
Flying Weight: 15.5 - 17 oz (440 - 480 g)
Motor Size: Park 370 BL Inrunner or Park 400 BL Outrunner
Radio: 4 ch or greater
Servos: 4 sub-micro
Trim Scheme Colors: scale decals applied
CG (center of gravity): 1 - 1/2 in (38mm) behind leading edge
Prop Size: 10 x 7 slow flyer
Hardware Included: yes
Speed Control : 20A Brushless
Recommended Battery: 1320mAh 2 or 3-Cell Li-Po
Control Throw (Ailerons): 1/4 in (6mm) Up/Down
Control Throw (Elevator): 5/8 in (16mm) Up/Down
Control Throw (Rudder): 1/2 in (12mm) Right/Left
Scale: 370 Park Flyer
Approx. Assembly Time: under 2 hours
Gear Ratio: 5.33:1 with 12T pinion

E-flite_Cessna_182_370_ARF

E-flite_Cessna_182_370_ARF

E-flite_Cessna_182_370_ARF

 

 

Back

 
New

Virtual-RC-Racing
MAGAZINES
spacer

Radio Control Car Action
spacer
Die Cast X Magazine
Die Cast X Magazine
spacer
Model Airplane News
Model Airplane News
spacer

Xtreme Radio Control Cars
spacer Copyright © 2004 -- 2008 Amazing Hobbies Inc. London Ontario